How to Reset Epson and Canon Printers with WIC Reset Utility Free Key
If you have an Epson or Canon printer that is showing an error message like \"Waste Ink Pad Counter Overflow\" or \"Service Required\", you may need to reset the waste ink pad counter. This is a feature that prevents the printer from leaking ink when the waste ink pads are full. However, sometimes the counter may reach its limit even when the pads are not full, or you may want to replace the pads yourself and reset the counter.
One way to do this is to use a software tool called WIC Reset Utility. This is a program that can reset the waste ink pad counter for many Epson and Canon printer models. You can download it for free from https://www.wic.support/download/. However, to use it, you will need a reset key that is compatible with your printer model.
wic reset utility free key
Download File: https://bltlly.com/2tGf6d
A reset key is a code that you enter in the WIC Reset Utility to unlock the reset function. You can buy a reset key from various online sources, such as https://www.wic.support/buy/. However, if you want to try it for free, you can use a trial reset key that will reset the waste ink pad counter to 80% one time only. You can get a trial reset key from https://www.wic.support/free-trial-reset-key/.
To use the WIC Reset Utility with a free key, follow these steps:
Download and install the WIC Reset Utility for your operating system (Windows, Mac or Linux).
Connect your printer to your computer with a USB cable and turn it on.
Run the WIC Reset Utility and select your printer model from the drop-down menu.
Click on \"Read Waste Counters\" to check the current status of your waste ink pad counter.
If the counter is more than 100%, click on \"Reset Waste Counters\".
Enter the trial reset key that you got from https://www.wic.support/free-trial-reset-key/ and click on \"OK\".
Wait for the program to reset the counter and show a confirmation message.
Turn off your printer and turn it on again.
Check the waste ink pad counter again to see if it has been reset to 80%.
Congratulations! You have successfully reset your printer's waste ink pad counter with WIC Reset Utility Free Key. However, remember that this is a one-time solution only. If you want to reset your printer again, you will need to buy a new reset key or use another trial reset key on a different computer. Also, keep in mind that resetting the counter does not mean that your waste ink pads are clean. You may still need to replace them or clean them periodically to avoid ink leakage or damage to your printer.How to Replace the Waste Ink Pads in Your Epson or Canon Printer
Resetting the waste ink pad counter is not enough to solve the problem of ink leakage or damage. You also need to replace the waste ink pads themselves, which are the sponge-like materials that absorb the excess ink from the print head. Replacing the waste ink pads is a bit more complicated than resetting the counter, but it can be done with some tools and patience. Here are the steps to replace the waste ink pads in your Epson or Canon printer:
Unplug your printer from the power source and disconnect it from your computer.
Remove any paper or cartridges from your printer and close all the covers.
Place your printer on a flat surface covered with plastic or newspapers to avoid staining.
Locate the screws or clips that hold the printer case together and remove them carefully. You may need a screwdriver or a knife to do this. Be gentle and do not force anything.
Lift off the printer case and set it aside. You should see the internal parts of your printer, including the waste ink pads.
The waste ink pads are usually located at the bottom of the printer, near the print head. They may be covered by a plastic shield or a metal plate. Remove any cover that blocks your access to the waste ink pads.
The waste ink pads are connected to a tube that carries the ink from the print head. You may need to disconnect this tube from the pads or from the print head. Be careful not to spill any ink or damage any part.
Use a pair of tweezers or pliers to pull out the old waste ink pads. They may be stuck or glued to the printer, so you may need to apply some force. Dispose of them properly in a sealed plastic bag.
Clean any ink residue from the printer with a damp cloth or paper towel. Do not use any solvent or alcohol as they may damage your printer.
Insert new waste ink pads in place of the old ones. You can buy new waste ink pads online or from a printer service center. Make sure they fit snugly and securely in your printer.
Reconnect the tube that carries the ink from the print head to the waste ink pads. Make sure there are no leaks or kinks in the tube.
Replace any cover that you removed from the waste ink pads area.
Put back the printer case and secure it with the screws or clips that you removed earlier.
Plug in your printer and turn it on. Run a test print to check if everything is working properly.
You have successfully replaced the waste ink pads in your Epson or Canon printer. However, remember that this is not a permanent solution. The new waste ink pads will eventually fill up again and need to be replaced. To avoid this problem, you can install an external waste tank that collects the excess ink outside your printer. You can buy an external waste tank online or make one yourself with some materials and instructions. 29c81ba772
https://www.kankun.io/group/mysite-231-group/discussion/b25c5980-dba2-4fd7-9912-b5b6f045ba3b
https://www.shul.org.au/group/mysite-231-group/discussion/0ff0b14c-545b-4574-92b0-996fccc7006d